Transformers Legacy toyline

[LordGigaIce]

Ok first I like the Elita/Minerva/Strongarm mould. Maybe it helps that I don't use it for Elita? Jet Elita 4 life

Anyway I consider myself someone with a fair bit of RiD 2001 nostalgia as it got me back into TFers as a young teen after BM was just too out there for my kid brain to handle at the time... and I think this Sideburn is fine?

My biggest complaint is the paint scheme. Guys, you gotta do a better flame deco.
But I also suspect TT will have me covered on that.

But the mould? No it's not a Viper but also it's 2024 and licensing exists and let's face it- Sideburn isn't Bumblebee where Hasbro's gonna got the extra mile for a licensed vehicle for a Generations release.

It's a sports car, he's got a flame deco (needs improvement there), he looks like Sideburn in robot mode, and he probably won't be a nightmare to transform.

I'd say he's going to be an instant buy if Hasbro had given him a good deco but as it is I'll wait for TT's offering.

But that nitpick aside... I'm not getting the hate.

 

[Donocropolis]

I halfway wonder if this sample is missing one paint operation? Like, if you had the white border around the faded flames, it'd be pretty close?

 

[unluckiness]

The front is relatively tall and chunky in a way that doesn't say sportscar. Those usually have long hoods and a low profile while this mold's hood is high and short in length when compared to its total height which evokes something like a family sedan's proportions. Not to mention that strange protrusion in the middle that makes the hood look even bulkier.

 

[lastmaximal]

This persistent false dilemma of it ONLY either being this or a fully licensed Dodge Viper is not where I saw this going on the Allspark. I don't know that anyone's even specifically asking for a retool of Shadow Striker into a licensed Dodge Viper, so who is that counterargument even for?

"Believably Earthen cars with a front that doesn't look like three knuckles" exist in Transformers toylines. In the last few years alone there's Legacy Knock Out, Legacy Dead End, and even Kingdom Tracks, who for all his engineering faults is specifically a non-licensed approximation of a specific Earth car.

 

[Princess Viola]

Ok first I like the Elita/Minerva/Strongarm mould. Maybe it helps that I don't use it for Elita? Jet Elita 4 life

Anyway I consider myself someone with a fair bit of RiD 2001 nostalgia as it got me back into TFers as a young teen after BM was just too out there for my kid brain to handle at the time... and I think this Sideburn is fine?

My biggest complaint is the paint scheme. Guys, you gotta do a better flame deco.
But I also suspect TT will have me covered on that.

But the mould? No it's not a Viper but also it's 2024 and licensing exists and let's face it- Sideburn isn't Bumblebee where Hasbro's gonna got the extra mile for a licensed vehicle for a Generations release.

It's a sports car, he's got a flame deco (needs improvement there), he looks like Sideburn in robot mode, and he probably won't be a nightmare to transform.

I'd say he's going to be an instant buy if Hasbro had given him a good deco but as it is I'll wait for TT's offering.

But that nitpick aside... I'm not getting the hate.

The Takara release is going to be identical to the Hasbro one fam and I can't imagine they'd do some TTM exclusive repaint with better flames just because...IDK that just doesn't seem like it'd be enough of a difference to make it worthwhile.

 

[Shadewing]

I really like Strongarm and how she turned out, I think she's the best looking version of that Mold. I also don't use it for Elita (Also a Jet Elita stan), but I just hate the car mode for it. I mentioned it previously but its not "it's not a porche" when it comes to Minvera. It's that it just looks bad. It looks like the car Homer Simpson designed. Strongarm could be bigger or bulkier, but to me she fixes the main issues with the mold.

Shadowstriker I was really hoping they'd remold the front end some to make it more evoke the viper. The car mode doesn't bother me as-is for Shadowstriker, but it bothers me a lot for Side Burn. Honestly that's kinda my second biggest issue with the mold*: The robot mode is fine for Side Burn, and the vehicle is fine for Shadowstriker; but the inverse is that they don't work for the other modes. I want a Cyberverse Shadowstriker, that actually looks like Cyberverse Shadowstriker. It's the primary mode she'd be displayed in. I WANT that frankenstien look she has for the majority of the series that they continue to refuse to give us. And I would prefer Side Burn to have a curvier looking car mode. I don't need it to be a Dodge Viper exactly, but something evokative would work. Even just rounding off the front bumper and maybe giving it a less flat roof would work. It feels like these are things that could be changed easily on this mold.

*First issue: The hugging way the did the arms, is the biggest thing that kills this mold for me regardless who it is.

 

[PrimalxConvoy]

This is a fair point, but it's not like our only choices are "actual Dodge Viper" and "exactly Shadow Striker". There's a wide range of "curvy Earth sports car" options in between.

Most of the car can even work as is, just the rear bumper is a flat plank and that car front is entirely... You know what, why is Shadow Striker's vehicle mode nose so... bulbous to begin with? I'm boggled at how one gets from the show model to this toy; it's like a blind man drew it from memory pre-blindness. If that were leaner and more angular like the Ultra class toy's, there might have been less work to do. Like, from there just round it off and make it a single shape rather than three.


This is the bit that genuinely makes it feel like an unfinished digibash.

Exactly. Hasbro has made KO vehicles for many of their TFs (especially of licenced cars), so they could easily do the same for Sideburn.

What with the overpriced Fire Convoy and this lame Sideburn, I think Hasbro has done RID dirty recently so far.

 

[lastmaximal]

I really like Strongarm and how she turned out, I think she's the best looking version of that Mold. I also don't use it for Elita (Also a Jet Elita stan), but I just hate the car mode for it. I mentioned it previously but its not "it's not a porche" when it comes to Minvera. It's that it just looks bad. It looks like the car Homer Simpson designed. Strongarm could be bigger or bulkier, but to me she fixes the main issues with the mold.

I also prefer Jet Elita (and for her to not be half the size of Optimus). I think Strongarm makes the mold work best because her altmode is supposed to have the blocker, wider back half. Hell, she might be the reason the mold even HAS that in vehicle mode, because neither of the other two designs have ever needed it.

I'm in full agreement with you that the Elita and Minerva versions look more like The Homer than either of their original/actual looks. "The Homer" was my exact thought as I looked at Minerva (my first copy of the mold) and saw a car front half with a bubble top welded to a truck back half, with the squat proportions and round vs boxy clash making it worse than Earthspark Bumblebee, who has a similar "boxy rear half of car" issue. (As with Side Burn, I don't need Minerva to be Specifically A Licensed Porsche, just not a car that looks this dumb.)

Strongarm wears the vehicle mode well, and that color scheme looks good on damn near anything. But she necessarily inherits the proportions of the other two, so it's less Strongarm than I'd like (plus the bumper-shoulders are a bit clunkier than I'd like). Maybe if they'd let Minerva be her own thing -- or, you know, have Nightbeat, her built-in mold relative, as her retooling batchmate -- and paired up Strongarm and an EarthSpark style Elita instead. But of course that assumes there can even be more than one base mold, so it's all moot.

I don't know. I'm actually oddly impressed at the ambition of wanting to wring these three distinct and disparate characters out of one mold, but they're just too different for it to be a success.

...You know, if they'd just grouped Elita, Minerva, and Shadow Striker, they could have a sleeker/less blocky altmode with no incongruous back half. The hood on the back can work as is for the first two and give Shadow Striker a frankensteined vehicle hood and single-color chest. Their proportions are all relatively closer to each other. Still three female characters, still a non-G1 third. Just shelf Strongarm until she can have her own mold to anchor -- although I can see the eureka moment of "Minerva's standing shoulder bits can work as horizontal shoulder bits for Strongarm" being HARD to resist, it's the only thing that works for both. This is a better retool base for Shadow Striker and Side Burn can fully own his mold -- there are still redeco/retool options for that.

 

[Princess Viola]

I like Legacy Minerva (obviously, if you know me) but it's still weird how Legacy is so focused on toon accuracy (for characters that originated in cartoons, replace 'toon' with 'comic' for comic-original characters that have gotten toys) and yet Minerva...isn't.

 

[lastmaximal]

I like the robot mode well enough to consider getting a spare (to keep one stock) to modify into a Transtector.

 

[LordGigaIce]

This persistent false dilemma of it ONLY either being this or a fully licensed Dodge Viper is not where I saw this going on the Allspark. I don't know that anyone's even specifically asking for a retool of Shadow Striker into a licensed Dodge Viper, so who is that counterargument even for?

The argument is that the Dodge Viper is very distinct and not as easy to get a "close enough but not" design as some other car designs.

I brought up Bumblebee because the VW Bug is the same kind of car. And when the VW was off the table they gave us various versions of G1 'Bee in alt modes that were too round, too blocky, and various levels of "eh that's not a Bug."

And I- and most people- were fine with it because we couldn't get a VW Bug.

And I guess my point is that after years of accepting generic yellow coups as Bumblebee this blocky car as Sideburn is just fine to me.

What with the overpriced Fire Convoy and this lame Sideburn, I think Hasbro has done RID dirty recently so far.

The RiD 2001 Prime HasLab is their most successful TF HasLab release yet.

Seems RiD fans don't share your perspective. And thank G-d.

 

[Undead Scottsman]

Most backers probably weren't getting charged Japan prices, which IIRC, were quite high in comparison.

 

[Sabrblade]

The thing about this mold's altmode is that it is still 90% Cyberverse Shadow Striker, and no exposed engine or change in color scheme is gonna change that.

Besides the engine and the windows being red (which seems to be a reference to ROTF Shadow Striker), the only major visual differences are that its sharper angles have been rounded off and smoothed out a bit, but most of which are still visible in the molding.

 

[Undead Scottsman]

Those two vehicles look pretty different, honestly. Like they didn't even get the hood correct, even ignoring the engine block, the middle is concave in cyberverse but convex on the toy. All of the shapes and stylings are off, the windows are the wrong shade, the wheels are almost flat on the toy while on the show model they're super concave.

It's more like a vague approximation someone made from memory.

 

[ZacWilliam1]

I feel like the toys is what you would get if you put RiD Sideburn and Cyberverse Shadow Striker on either end of an animorphs type slide bar and moved it 75 to 80 percent toward Striker.

-ZacWilliam, it's her Cyberverse vehicle with just a dash of his changing it up in the details.

 

[lastmaximal]

This whole thing is so weird. In trying to make something that's both, they made decisions that led to a weird mishmash that is not sufficiently either and so might as well be neither. It's almost Side Burn's robot mode transforming into Shadow Striker's altmode, except the altmode doesn't end up looking much like Shadow Striker's altmode.

It has some of the angular vibe, such as in the doors/sides. But the rest of the altmode, in particular the oddly blobby hood, looks nothing like Shadow Striker's. What should feel more like Prime Wheeljack with a different hood ends up being something like a stock car with an odd three-part hood.

(I don't know, were they taking inspiration from ROTF Shadow Striker's pointy hood along with the window colors? Because both of those are absurd choices for something ostensibly homaging Cyberverse Shadow Striker. But then, this is the design team that made a BW Scavenger head instead of an Antagony head, and decided to make Antagony.

Edit: Googling it and even the shape of the headlights is a closer match. What is going on.)

 

[LordGigaIce]

Most backers probably weren't getting charged Japan prices, which IIRC, were quite high in comparison.

I've lived in Canada all my life so I just accept that different regions will have different pricing and sometimes you just gotta accept that

 

[Rhinox]

So Sandstorm is amazing. Like, spectacularly good. Shard is also really decent. I like her even without the whole 'pick her apart and use her as armor' gimmick. Haven't opened the rest yet. Really looking forward to Silverbolt and Starscream.

 

[Platypus Prime]

In my head cannon this is both why Origins Wheeljack looks like this and why he went back to the 'van'.

 

[unluckiness]

The thing about this mold's altmode is that it is still 90% Cyberverse Shadow Striker, and no exposed engine or change in color scheme is gonna change that.

Besides the engine and the windows being red (which seems to be a reference to ROTF Shadow Striker), the only major visual differences are that its sharper angles have been rounded off and smoothed out a bit, but most of which are still visible in the molding.

When you order a car from Wishdotcom.