 Jin's Transformer fixes! Booster X-10 neck fix, new!, Fixes: Brawl, Wreckage, Booster X-10 |
 |
Allspark Movie News
Be sure and check out all of the latest movie news and updates in our Transformers: The Movie News Section
-=Official Website=-
Got some hot movie news? LET US KNOW!
  |
 Jul 6 2007, 01:55 AM
Post
#1
|
|
 Customizing Mecha Pilot Group: Citizen Posts: 307 Joined: 17-November 06 From: California Member No.: 9,370 Faction: Free Agent  |
First two fixes.
Wreckage torso fix: This fix is to keep his chest from automorphing up after you've transformed him. Basically you make a connector between the bottom of his chest and the top of the gun that protrudes. Drill a small hole and insert/glue a plastic peg. Drill a hole on the top of the gun that lines up with the peg. Hold gun after automorphing and push the chest down, it stays in place now. (IMG:http://www.angelfire.com/mech/jinsaotome/WreckFix.jpg) Brawl shoulder fix: This fix keeps Brawls arms from swinging down after transforming him. Locate the tabs on the side of the tank turret. Drill/file a groove in the top of them. Locate the holes they snap in to and drill a groove towards the back of the figure. You can add some superglue to the opposite surface of both parts to make sure the grooves sit snugly together after you join them. (IMG:http://www.angelfire.com/mech/jinsaotome/BrawlFix.jpg) More fixes will be added as I make them. This post has been edited by Jin Saotome: Jul 10 2007, 05:01 PM -------------------- "If my father were alive, I could make him proud!"
"Go back to playing video simulations, weakling!" "What is V.A.? Variant Armour, used in combat!"  |
 |
 
|
|
Jul 6 2007, 01:59 AM
Post
#2
|
|
 Caedite eos! Novit enim Dominus qui sunt eius! Group: Citizen Posts: 4,740 Joined: 13-January 07 From: Middle of Nowhere Member No.: 9,861 Faction: Free Agent |
I didnt even know there was a problem with Wreckages' chest automorphing.
Thanks for the tip on brawl tho, the glue trick was working for a while but now its wearing off, i might have to attempt this and see what happens. --------------------   Get your Portable ID! For your benefit, read everyone of my post's in Peter Griffin's voice, and they'll make more sense. |
|
|
|
|
Jul 6 2007, 02:44 AM
Post
#3
|
|
 The world suffused with sound Group: Citizen Posts: 10,363 Joined: 24-August 03 Member No.: 3,458 |
Looking at Wreckage, I'm assuming that swinging the minigun up behind his chest cannon was supposed to lock the whole thing in place. And it would, if the minigun actually clicked into place as well. Whoops.
|
|
|
|
|
Jul 6 2007, 03:35 AM
Post
#4
|
|
|
Customizing Mecha Pilot Group: Citizen Posts: 307 Joined: 17-November 06 From: California Member No.: 9,370 Faction: Free Agent |
QUOTE(mx-01 archon @ Jul 6 2007, 12:44 AM) [snapback]671129[/snapback] Looking at Wreckage, I'm assuming that swinging the minigun up behind his chest cannon was supposed to lock the whole thing in place. And it would, if the minigun actually clicked into place as well. Whoops. Yeah, maybe they just forgot to put a peg there. I can wedge something behind the gun to keep it in place but there's still a gap between his chest and stomach gun so this fix will take care of that. -------------------- "If my father were alive, I could make him proud!"
"Go back to playing video simulations, weakling!" "What is V.A.? Variant Armour, used in combat!" |
|
|
|
|
Jul 6 2007, 09:13 AM
Post
#5
|
|
 Animated! Group: Forum Moderator Posts: 6,939 Joined: 13-January 02 From: Bloomington, IN Member No.: 313 Faction: Cannonball's Pirate Crew |
One thing I was thinking about...the way the sides of the front swing to the back, they have little grooves to fit into the detailing at the back of the vehicle. If that had been turned into a peg system, it'd be perfect and completely unobtrusive in both modes.
--------------------  |
|
|
|
|
Jul 6 2007, 02:43 PM
Post
#6
|
|
 Group: Citizen Posts: 9,602 Joined: 15-February 04 From: New Berlin, Moon Member No.: 4,218 |
The only fix for Brawl is the scrap heap.
--------------------  Toilet paper is a luxury now! MacGruber! |
|
|
|
|
Jul 6 2007, 02:51 PM
Post
#7
|
|
 Group: Protoform Posts: 646 Joined: 4-June 07 From: Behind you Member No.: 10,294 Faction: Decepticon |
how do you carve the groove in brawls hole?
--------------------  |
|
|
|
|
Jul 6 2007, 02:57 PM
Post
#8
|
|
|
Customizing Mecha Pilot Group: Citizen Posts: 307 Joined: 17-November 06 From: California Member No.: 9,370 Faction: Free Agent |
QUOTE(Fireblast @ Jul 6 2007, 12:51 PM) [snapback]671668[/snapback] how do you carve the groove in brawls hole? I use a Dremell tool with a small dentist-burr bit. -------------------- "If my father were alive, I could make him proud!"
"Go back to playing video simulations, weakling!" "What is V.A.? Variant Armour, used in combat!" |
|
|
|
|
Jul 6 2007, 03:00 PM
Post
#9
|
|
 MMMmmmmmmm......yummy..... Group: Citizen Posts: 3,078 Joined: 15-January 07 From: Waldorf, MD Member No.: 9,879 Faction: Decepticon |
QUOTE(Fireblast @ Jul 6 2007, 03:51 PM) [snapback]671668[/snapback] how do you carve the groove in brawls hole? Well, first you get him really drunk... --------------------  QUOTE(TVsGrady) You must constantly use to phrase "raping my childhood" in reference to anything that's insufficiently GEEWUN-like for your tastes. |
|
|
|
|
Jul 6 2007, 07:05 PM
Post
#10
|
|
|
Group: Citizen Posts: 48 Joined: 13-January 02 Member No.: 317 |
I find nail files work well for work on plastic too.
|
|
|
|
|
Jul 6 2007, 07:17 PM
Post
#11
|
|
 Group: Protoform Posts: 186 Joined: 28-April 07 Member No.: 10,163 |
QUOTE(Pigbag @ Jul 6 2007, 02:43 PM) [snapback]671655[/snapback] The only fix for Brawl is the Leader Class Brawl. Fixed for truth! -------------------- QUOTE(My Crazy Uncle Larry) I had a creepy old sniper who once lived opposite my house some years ago. He kept asking me to do his shopping! "Have you got a list", I asked. He said, "If you go shopping for me, I can cross your name of my list!!!"  |
|
|
|
|
Jul 10 2007, 05:15 PM
Post
#12
|
|
|
Customizing Mecha Pilot Group: Citizen Posts: 307 Joined: 17-November 06 From: California Member No.: 9,370 Faction: Free Agent |
New fix, more of a modification really. Really tho, Booster has a piece of 'spinning meat' for his neck is, two swivel joints that do the same thing. You can probably go the extra step and add a joint in there so his head turns too, but this fix allows for full up/down movement to mimic how the old Laserbeak's head worked.
First, locate an old Doc Ock spiderman movie figure. Kaybee always has them on clearance. The bendy tentacles or grabbing tentacle figure, either one has the right sized lower claws. The big ones are the one you want and these things are great for fodder, you could make Jazz or Starscream hands easy from the leftover parts. Anyway, pop apart Booster's neck and discard the middle section. Cut the peg off of the head flush. Next, cut the Doc Ock finger claw as shown in the picture. Measure it up and you'll find the center part is the EXACT same length as Booster's old neck. Glue the plug-end of the claw into his neck hole, then glue his head on to the other end. Now Booster can look straight down, or up and forward. (IMG:http://www.angelfire.com/mech/jinsaotome/Booster_X10.jpg) Obviously Booster has been repainted to look like Laserbeak, he comes red in the store, heh. I'll have a full pic set of 'Laserbeak' in the Iacon art gallery soon. This post has been edited by Jin Saotome: Jul 10 2007, 05:16 PM -------------------- "If my father were alive, I could make him proud!"
"Go back to playing video simulations, weakling!" "What is V.A.? Variant Armour, used in combat!" |
|
|
|
|
Jul 10 2007, 05:28 PM
Post
#13
|
|
 HE TELL ME DRILL WILL PIERCE HEAVENS Group: Citizen Posts: 10,558 Joined: 12-August 05 From: Knoxville, Tn Member No.: 7,060 Faction: Autobot |
That's a rather nice fix. I like.
-------------------- |
|
|
|
|
Jul 11 2007, 07:50 AM
Post
#14
|
|
 Eschew Obfuscation Group: Citizen Posts: 1,501 Joined: 21-May 03 Member No.: 2,869 Faction: Decepticon |
Another fantastic job. I was looking through your site and I love your "ninja" Wreckage. I didn't even know his weapons combined like that! Great job overall.
|
|
|
|
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 20th November 2009 - 06:09 PM |